ROBLAND D 510

Table:
The thicknesser table, mounted via 4 big posts offers great stability, even when planing long, heavy timbers.

For wet or damp timber, fully retractable rollers can be provided. Please note that this option must be ordered with the initial order for the machine.

Planed table:
The big cast iron table is precision planed for smooth sliding of the wood.
Highest quality ‘cold process machining’ is used, which produces ensures that the table surface stays absolutely flat throughout its life.

Digital read-out
Standard equipment on the machine: digital read-out with precision 1/10 mm.

Frame:
The frame is built of 6 mm steel plate, and is carefully designed to maximise strength and rigidity, it’s made in a so called ‘box frame’ resulting in an extremely sturdy and torsion resistant base.

Serrated infeed roller
Wood pushers on both in-and outfeed side

Four 18% HSS knife cutter-block

(Optional: 4 reversible knife cutter block)

Smooth outfeed roller

Option: table rollers

Motors and transmissions:
The machine is equipped in the standard version with a 5,5 kW (7,5 hp) motor.
Optional motor of 7,5 kW (10 hp) can be provided. Standard tension of the machine is 400 Volt, upon request the machine can be made in 230 Volt three phase.

The transmission of the cutter block is achieved by double V-belts; the transmission of the feed rollers is achieved by sprockets and chains.

Thicknesser capacity:
Standard equipment on the D-510: power rise and fall of the table, digital read-out with precision 1/10 mm. (capacity 250 mm)

Feeding of the wood
Standard on all machines: heavy pushers on both in-and outfeed side, 100 mm diameter, 4 knife 18% HSS cutter-block with magnetic knife setter jigs. The optional 4 turn blades cutter-block provides a major advantage of quick precision setting of knives. Also standard feature on the machine: separate motor drive of feed rollers with 4 speeds (5/8/10/16 m/min.)

Positioning the table at 1/10 mm poses no problem thanks to the frequency variator controlled rise and fall drive.

Technical specifications:
Motor power kW 5, 5
Number of knives 4
Dimensions knives mm 510 x 28 x 3
Dimensions table mm 1050 x 510
Diameter suction outlet mm 160
Diameter cutter-block mm 100
Thicknesser capacity mm 250
Feeding speeds m/min 5 / 8 / 10 / 16
Serrated infeed roller mm 1 dia 50 mm
Outfeed roller mm 1 dia 50 mm
 
Numero di macchina:
Anno della costruzione: NEW
Tension: 400V 50Hz 3Ph