Calibrating and/or squaring line with edge banding doing panels all round in 2 passes Panel width min/max: 220 / 1000 mm Panel length min/max: 320 / 3200 mm Edges max. 3 x 45 mm. Fixed side at the left Siemens SMSPC controls
Line set up: Vacuum feeder Turning station length to cross Double end tenoner Turning station length to cross Double squaring and edgebanding Turning station cross to length Vacuum stacker
1.01 FEEDER, type CAR MS 2000 2-lane
1.02 TURNING STATION LENGTH-CROSS, type TR 100 90° turning of workpieces by means of 2 clamping discs
1.03 DOUBLE END TENONER, type SI_V 112 - schéma 4500 Squaring panels or calibrating/shaping solid wood panels Panel feed by chains, chain width 80 mm Max. pass in thickness 150 mm Feed speed 7 to 36 m/min Equipment: 1+1 Jump scorer, motor 1,4 kW (max. panel thickness 80 mm) 1+1 Hogger, motor 7,35 kW 1+1 Jump shaper, motor 7,35 kW 1+1 Shaper, motor 7,35 kW 1+1 Shaper rounding the leading panel corner on solid wood panels (radius max. 40 mm, panel thickness max 50 mm) 1+1 Shaper rounding the leading panel corner on solid wood panels (radius max. 40 mm, panel thickness max 50 mm)
1.04 TURNING STATION LENGTH-CROSS, type TR 100 90° turning of workpieces by means of 2 clamping discs
1.05 Double sided squaring and edge banding machine, type PANELMATIC 2 - schéma G9i - 10530 mm 1st and 2nd pass machine Infeed chain with 1300 mm length in order to take 1220 mm panels Panel alignment at the infeed Roller chain with bearings Automatic pop-up dogs with 540 mm centers Max. panel thickness 60 mm Equipment: 1+1 Jump scorer, motor 1,4 kW 1+1 Hogger, motor 7,35 kW 1+1 Jump shaper 7,35 kW 1+1 Jump shaper 7,35 kW 1+1 Hot melt glue application by roller with pre-melting, unit tilting 0 - 4 ° 1+1 Twin coil edge magazine, edges max. 3 x 45 mm 1+1 Pressure zone with 1 driven, 4 loose pressure rollers, unit tilting 0 - 4° 1+1 End trims, motors 2 x 0,88 kW 1+1 Rough trimming, motors 2 x 0,88 kW, vertical tracers 1+1 Fine/Radius trimming, motors 2 x 0,33 kW, vertical and lateral tracers 1+1 Universal shaper, motor 4 kW, with tracer 1+1 Universal shaper, motor 4 kW, with tracer 1+1 Universal shaper, motor 4 kW, with tracer 1+1 Oscillating buffing 2 x 0,24 kW
1.06 TURNING STATION CROSS TO LENGTH, type TR-001
1.07 Stacker, type CAR/S MS 2000 2-lane
Year of construction:
400V 50Hz 3Ph 195kW
Sign up for our weekly newsletter
Since 1989 Vebim NV is specialized in purchase, sale and revision of second-hand woodworking machines.
You can also find a number of new machines including the full range of ROBLAND machines, VG brush and grinding machines and NAZZARENO briquette presses.
Open at the moment! Do not hesitate to contact us.