Double sided squaring and edge banding machine KF 20/12/QA/30
Edges up to 20 mm thickness
First and second pass machine
Panel feed by rolling chain
Top pressure by driven V-belts
Width adjustment over linear slideways
Feed speed 10 to 40 m/min
Panel outstand 40 mm.
Workpiece thickness 8 to 60 mm.
Working height: 950 mm.
Working width, double sided min. 240, max. 3000 mm.
Coil edges 0,3 to 3 mm., coil-diameter 900 mm.
Middel support automatic
fence left mobile side right
Equipment left and right:
1 Infeed rollers
1+1 Long infeed chain, machine II + 1000 mm
Squaring part:
1+1 milling motor 4,5 kW, 100 Hz
2+2 Motors 4,5 kW forming the compact hogging unit
2+2 Jump milling motor 6,6 kW, 100 Hz, switch for left/right turning
Edging part (A20):
1+1 Pre-heating of the panel edge
1+1 Hot melt unit A34
1+1 solid edges up to 20 mm, Twin coil magazine (2 x 3 mm) and autom. Coil change, guillotine for edges up to 3 mm.
1+1 Pressure zone C with 1 driven and 6 non driven rollers
1+1 Rough trimming: 2 x 1,5 KW
1+1 Top/bottom fine trimming MF21, tilting, 2 x 0,55 kW
1+1 Contour trimming FF12, 4 x 0,4 KW
1+1 Universal jump shaping/grooving unit UF11, 4 kW Motor
1+1 Universal jump shaping/grooving unit UF11, 4 kW Motor
1+1 Edge sanding unit KS10 with automatic positioning
Controlls NC 21
machine revised and delivered from Homag in 2005