website filter 
Category

Location

  BRANDT - LIGMATECH KDF 550 - ZHR 01/R/065  BRANDT - LIGMATECH KDF 550 - ZHR 01/R/065
  BRANDT - LIGMATECH KDF 550 - ZHR 01/R/065  BRANDT - LIGMATECH KDF 550 - ZHR 01/R/065
  BRANDT - LIGMATECH KDF 550 - ZHR 01/R/065  BRANDT - LIGMATECH KDF 550 - ZHR 01/R/065
  BRANDT - LIGMATECH KDF 550 - ZHR 01/R/065  BRANDT - LIGMATECH KDF 550 - ZHR 01/R/065
  BRANDT - LIGMATECH KDF 550 - ZHR 01/R/065  BRANDT - LIGMATECH KDF 550 - ZHR 01/R/065
  BRANDT - LIGMATECH KDF 550 - ZHR 01/R/065  BRANDT - LIGMATECH KDF 550 - ZHR 01/R/065
  BRANDT - LIGMATECH KDF 550 - ZHR 01/R/065  BRANDT - LIGMATECH KDF 550 - ZHR 01/R/065

BRANDT - LIGMATECH KDF 550 - ZHR 01/R/065

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit
Edge thickness: 0,4 to 8 mm
Workpiece thickness: 8 - 50 mm
Feedspeed 14 m/min (limited to 11 m/min using the contour trimming)
Workpiece transport by chain, top pressures with rubber rollers
Sound enclosure over all trimming motors
Equipment:
Adjustable fence
Pre-milling with 2 shapers, each 2,2 kW
Coil and strip magazine, guillotine for 3 x 45 mm edges, 800 mm coils
Hot melt unit, Quickmelt type
Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers
End trims, 2 x 0,35 kW motors, straight and chamfer 15°
Top/bottom trimming, tilting, motors 2 x 0,35 kW
Contour trimming unit, leading and following edge, 2 x 0,35 kW
Radius scraping unit
Glue scrapers
Buffing unit
Controlls PC 20+
working hours: 2698 h

LIGMATECH ( year 2000 )
Return conveyor for panels coming out of a single sided shaping or edge banding machine with fence at the right and with a length of approx. 6,5 m.
Max. panelsizes: 2000 x 800 mm., min. 300 x 150 mm.
At the machine outfeed, a tilting air flotation table brings the panels on the return conveyor belt
Long panels pass a fence roller which turns them lengthwise on the return belt

Code:

K-304-005651

Machine Nr.:

0-261-07-3359

Year of construction:

2009

Tension:

400V 50Hz 3Ph