Hot Air Automatic Edgebander
Equipped with electronally controlled temperature setting for Leister hot air blower. 3,000 watts for 1 minute heat-up time
Edgebanding Thickness: 0.4 to 1.2 mm
Edge Panel Thickness: 11 mm to 35 mm
PVC Edge 1.2mm max.
Glue system hot air; pre-glued edgebanding.
Feed speed: 5 m/min.
Automatic coil feeding, with overhead belt type feeder
End cutter-guillotine, front and rear end trim by knife
Top and bottom flush trim cutter
Single motor drive to cutter-heads