Single sided edge bander with hot melt, fixed side at the right, pre-milling unit
Edge thickness: 0,4 to 8 mm
Workpiece thickness: 8 - 50 mm
Feedspeed 14 m/min (limited to 11 m/min using the contour trimming)
Workpiece transport by chain, top pressures with rubber rollers
Sound enclosure over all trimming motors
Equipment:
Adjustable fence
Pre-milling with 2 shapers, each 2,2 kW
Coil and strip magazine, guillotine for 3 x 45 mm edges, 800 mm coils
Hot melt unit, Quickmelt type
Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers
End trims, 2 x 0,35 kW motors, straight and chamfer 15°
Top/bottom trimming, tilting, motors 2 x 0,35 kW
Contour trimming unit, leading and following edge, 2 x 0,35 kW
Radius scraping unit
Glue scrapers
Buffing unit
Controlls PC 20+

working hours: 2698 h