SALVAMAC SALVAPUSH 2000
Automatic optimising crosscut
Vebim reference: 5417
Machine number:
Year of construction:
Tension: 400V 50Hz 3Ph
Automatic crosscut saw with programmable pusher, working right to left
Full length optimization and defect cutting with chalk marks
Pusher equipped with fluorescent camera for detecting chalk markings and length measurement
Feeding table with 25 ° inclination
Material input length: min 500 mm - max 4100 mm
cutting section: min.30x12 mm - max 270 x 120 mm / 300x95 mm
Possibility to make 1 cut in the last 40 mm
Last cut at min 5 mm from the end of the workpiece
Saw blade diameter 500 mm.
Saw motor 5.5 kW
Feed speed pusher approx. 60 m / min
Sawing cycle adjustable between 0.1 and 1 sec.
Output table 3 m with 25 ° inclination
SALVA-OPTIM control with 12 "touchscreen
Full length optimization and defect cutting with chalk marks
Pusher equipped with fluorescent camera for detecting chalk markings and length measurement
Feeding table with 25 ° inclination
Material input length: min 500 mm - max 4100 mm
cutting section: min.30x12 mm - max 270 x 120 mm / 300x95 mm
Possibility to make 1 cut in the last 40 mm
Last cut at min 5 mm from the end of the workpiece
Saw blade diameter 500 mm.
Saw motor 5.5 kW
Feed speed pusher approx. 60 m / min
Sawing cycle adjustable between 0.1 and 1 sec.
Output table 3 m with 25 ° inclination
SALVA-OPTIM control with 12 "touchscreen
5417
New
Comments (0)
No customer reviews for the moment.